Safety requirements for scaffolding in Standards - 29 CFR 5
To be continued
1910.28(a)(21)
Only treated or protected fiber rope shall be used for or near any work involving the use of corrosive substances or chemicals.
1910.28(a)(22)
Wire or fiber rope used for scaffold suspension shall be capable of supporting at least six times the intended load.
1910.28(a)(23)
When acid solutions are used for cleaning buildings over 50 feet in height, wire rope supported scaffolds shall be used.
1910.28(a)(24)
The use of shore scaffolds or lean-to scaffolds is prohibited.
1910.28(a)(25)
Lumber sizes, when used in this section, refer to nominal sizes except where otherwise stated.
1910.28(a)(26)
Scaffolds shall be secured to permanent structures, through use of anchor bolts, reveal bolts, or other equivalent means. Window cleaners' anchor bolts shall not be used.
1910.28(a)(27)
Special precautions shall be taken to protect scaffold members, including any wire or fiber ropes, when using a heat-producing process.